KIP 9000 Service Manual page 677

(4) Key Card Setting Mode (Item No.6)
If a Key Card is connected to KIP9000, it is possible to make the printer recognize its existence,
and it is also possible to decide the counting unit.
Setting value Contents
0 Key Card is not connected.
1 Key Card is connected, and it counts the print length by every 1m for each
paper width separately.
2 Key Card is connected, and it counts the print length by every 0.1m for each
paper width separately.
3 Key Card is connected, and it counts the number of prints for each standard
size separately.
1. After indicating the Item Number "6" on the 2nd digit, press the [ ENTER ] Key. The setting
value on the 6th digit flashes and becomes changeable.
2. Change the setting value pressing [
MENU ENTER ONLINE
MENU ENTER ONLINE
Setting value flashes.
] Key (increment) and [
MENU ENTER ONLINE
MENU ENTER ONLINE
8-152
] Key (decrement).
K115sm8e4.doc