KIP 9000 Service Manual page 348

5.10.2 Replacing Separation Sensor (PH18)
1) Draw out the Process Unit making reference to
[5.1.1 Drawing out the Process Unit] on the page 5-3.
Remove the Drum Assembly and keep it in the box to
avoid the light.
2) Remove the Fuser Unit from the machine making
reference to [5.7.1 Removing Fuser Unit] on the
page 5-58.
3) Open the Rear Upper Cover (1), and disconnect the connector (2).
1 1
5-136
2
K115sm5e9.doc