KIP 9000 Service Manual page 228

2) Pick the lever of each
remove from the Image Corona.
Replace the Wire Cleaning Units (2) with the new ones.
2
NOTE
After installing the new Wire Cleaning Unit, confirm
the Corona Wire is caught between pads of Wire
Cleaning Unit, and also the Corona Wire is straight.
If the Corona Wire is out of pads or if it is bent, it will
exert a bad effect on the image quality as the height
of Corona Wire is not correct.
Wire Cleaning Unit (2) to release, move the unit as the arrow mark and
5-16
2
Pads
K115sm5e2.doc