KIP 9000 Service Manual page 647

8. 1. 8.4 Description of each Setting Mode
(1) Print Start Mode (Setting Mode No.0)
This mode starts and stops a Test Print.
To start printing, press the [ ENTER ] Key when "rdy" is indicated.
To stop (cancel) printing in the middle, press the [ ENTER ] Key again.
Print Start Mode informs the status of KIP9000 indicating a Status Code on 4th, 5th and 6th digits.
Status Code
rdy
Er
JA
OP
noP
- -
Prt
MENU ENTER ONLINE
Status
Meaning
Printer is ready for printing.
An error occurs.
A Jam occurs.
Any door is open.
Media is not installed on the selected media
source.
Waiting
During print.
8-122 K115sm8e4.doc