Replacing Separation Assist Blowers (Bl12 To Bl16) - KIP 9000 Service Manual

5.1.4 Replacing Separation Assist Blowers
(BL12 to BL16)
1) Remove each Image Corona (1), Cleaning Roller (2) and Drum Assembly (3) from the Process
Unit making reference to [5.1.2 Removing Image Corona, Drum Assembly, Toner Hopper &
Developer Unit] on the page 5-6.
1
2
NOTE
Do not put the Cleaning Roller (2) temporarily on the Process Unit, but please remove it
completely and put it on the paper.
2) Disconnect the connector (4), remove 2 pieces of bind head screws (5) and remove each
Separation Assist Blower
Replace the Separation Assist Blower (6) with the new one.
5
3
(6).
4
5-12
6
K115sm5e2.doc