Length Of Image For Roll 2 (No.78 To 83) - KIP 9000 Service Manual

(11) Length of image for Roll 2 (No.78 to 83)

It is possible to adjust the length of print image. These settings are applied when printed with
Roll 2. The setting unit is 0.01%, and the setting range is from -1.00% to +1.00%. Increment
makes the image longer to vertical direction.
Value is decreased.
Exch Item No. has its own target media type and media size.
Please adjust the proper item.
Item No. Media type
78 Plain paper
79 Plain paper
7A Plain paper
7b Plain paper
7C Tracing paper
7d Tracing paper
NOTE
(1) Media sizes "large", "medium", "small" and "smallest" stand for as follows.
Metric (Width)
Large A0 and B1
Medium A1 and B2
Small A2 and B3
Smallest A3
(2) Items from No.78 to 83 are "dual value items" that are available to set both "Standard
Setting Value" and "Special Setting Value".
Refer to [(10) Standard / Special Setting Value Changing Modes (Items No.09, 0A & 0b)]
on and after the page 8-51 for the detail.
Media size Item No.
Large 7E
Medium 7F
Small 80
Smallest 81
Large 82
Medium 83
Inch (Width)
36", 34" and 30"
24" and 22"
18" and 17"
12" and 11"
8-106
Value is increased.
Media type Media size
Tracing paper Small
Tracing paper Smallest
Film Large
Film Medium
Film Small
Film Smallest
K115sm8e3.doc