KIP 9000 Service Manual page 370

5.11.3 Replacing Mylar
1) Remove the Transfer / Separation Corona (1) from the machine making reference to
[5.11.1 Removing Transfer / Separation Corona] on the page 5-151.
2) Strip off the Mylar
Replace the new Mylar (2) with the new one
NOTE
Align the edges of Mylar with the front face and side faces of TR Guides B (3).
3
Align the short edge with this side face.
1
(2) from the Corona Housing 5.
Align the long edge with these front faces.
5-158
1
2
K115sm5eB.doc