5.3
Drum Assembly
5.3.1
Replacing each Periodical Replacement Part of the
Drum Assembly
(Photo Conductive Drum & 178T Gear)
NOTE
Drum Assembly has the following Periodical Replacement parts.
Photo Conductive Drum (1 piece)
178T Gear (1 piece)
This section instructs you to replace all of these parts as one sequent work.
1) Remove the Drum Assembly (1) from the Process Unit making reference to [5.1.2 Removing
Image Corona, Drum Assembly, Toner Hopper & Developer Unit] on the page 5-6.
Stand the removed Drum Assembly on the attached Drum Stand (2) with its gear side down.
2) Remove 3 pieces of hexagon head bolt (3) to remove the Flange B (4).
4
3
200,000m
500,000m
1
3
5-21
1
2
K115sm5e2.doc