Process Unit; Drawing Out The Process Unit - KIP 9000 Service Manual

5.1

Process Unit

5.1.1

Drawing out the Process Unit

1) Open the Toner Cover (1) and the Toner Cartridge
Cover (2).
2) Rotate the Toner Cartridge (3) half revolution to move the opening (4) to the top position.
Then, close both Toner Cover (1) and Toner Cartridge Cover (2).
NOTE
There is a Shutter under the opening (4).
Even if you draw out the Process Unit without moving the opening (4) to the top, it will catch
the spilt toner.
But if too much toner is caught, it will spill into the machine in the end.
Please do not forget to move the opening to the top.
2
3
5-3
1
4
K115sm5e2.doc