KIP 9000 Service Manual page 252

NOTE
(3) Paste the Seal 13 and Seal 14 first, and paste the Seal 19 with taking care not to have any
space between Seal 13 and Seal 19.
Have no space
Seal 19
Seal 13
Have no space
Seal 14
(4) Do not paste the new Side Seals (83 & 89) at this point of time. It will be better to paste
them after reassembling the Developer Unit completely.
89 83
(5) When pasting the Side Seals (83 & 89), align their short edges with each inside faces of
the roller guide.
83 & 89
Align here
83 & 89
5-40 K115sm5e3.doc