KIP 9000 Service Manual page 402

NOTE
When reassembly, put back the 15T Sprocket
Assembly (10) with the Hexagon Head Bolts (9)
loosed, hook the Spring 211 (8) as it was, then
tighten the Hexagon Head Bolts (9).
You do not have to give any tension to the Roller
Chain especially but only the tension of Spring 211
(8) is enough.
5) Disconnect 3 connectors (11), and then remove 2 pieces of each tooth washer screw (12) and
Hexagon Head Bolt (13) to remove the 15T Sprocket Assembly (14).
12
13
14
5-190
8 10
11
12
13
K115sm5eE.doc
9