Removal Of Tape, Screws And Shock Absorbers - KIP 9000 Service Manual

2.4 Removal of Tape, Screws and Shock
Absorbers
Remove the tape, screws and shock absorbers which secure some movable items. They prevent parts
from being damaged during transportation.
1. Remove 2 screws with the tag (1) on the bottom of the Fuser. These screws are no longer used.
NOTE
The above 2 screws removes pressure during delivery to avoid damage.
As the Pressure Roller needs to give proper tension to the Fuser Roller during normal
operation, do not forget to remove these screws at installation. If not removed, the toner will
not be fused.
2. Open each Roll Deck (2) and remove the tape (3) and the shock absorber (4).
1
3
2
2-12
4