KIP 9000 Service Manual page 699

8. 2. 6 User Mode 6
(Transfer Support LED ON/OFF [Film])
[Function]
It is possible to turn on the Transfer Support LED for getting a clearer and darker image when
printed with a unsupported printing media.
(Transfer Support LED is also called "Separation Lamp" that is below the Separation Corona.)
NOTE
(1) The printed image may look not clear or not enough dark when printed with some king of
unsupported type of printing media. In such case the print image may possibly become
clearer and darker if the Transfer Support LED is turned on in the User Mode 6. (However
note that the Transfer Support LED is not always the complete solution for such case.)
(2) The service personnel can decide to which media type the Transfer Support LED should
work. See the following each page.
•
[(17) Separation Lamp ON / OFF (PPC) (No.17)] on page 8-60
•
[(18) Separation Lamp ON / OFF (Tracing) (No.18)] on page 8-61
•
[(36) Separation Lamp ON / OFF (Film) (No.C6)] on page 8-76
[Operation]
1. Press the [ MENU ] Key 6 times to select the User Mode 6. [ MENU ] Key lights green and the
Status Display indicates "U6.".
MENU ENTER ONLINE
Press [ MENU ] 6 times.
MENU ENTER ONLINE
8-174 K115sm8e5.doc