KIP 9000 Service Manual page 37

20. Put the 36"x5" paper (36) under the Sender Screw of Toner Hopper to close the toner
supplying holes on the bottom of Toner Hopper. (Shift the 36"x5" paper (36) to the left side as
far as possible.)
This is an accessory of KIP9000.
21. Shake the Setup Toner Bottle (37) to
loosen the toner.
(Setup Toner Bottle includes 200g of toner.)
22. Supply the Setup Toner into the Toner Hopper so that an even level of toner can be kept
across the hopper. (The Sender Screw should be covered evenly)
36
36
Sender Screw
2-24
Toner Sender Screw
36
36
37