KIP 9000 Service Manual page 379

6) Catch both sides of the LED Head, and then move the driven side of it as the arrow marks in the
photo show in order to make the Pin (8) comes out from the Slit (9) of the Side Plate.
7) Pull out the Positioning Pins on the driving side from the Positioning Slits (10), and then remove
the LED Head (11) from the machine.
NOTE
(1) The wire (12) of LED Cleaning Motor may be
broken if it is loaded.
Please put the LED Head on the table as the
right figure shows so as not to give a load to the
wire.
Please read the next page as some more notes are mentioned.
8
10
5-167
8
11
12
K115sm5eC.doc
9