KIP 9000 Service Manual page 29

5. Open the Top Rear Cover (9), disconnect the connector (10) on the left, remove 4 tooth
washer screws (11), and remove the Top Center Cover (12).
11
6. Open the packaging box of LED Head, and carefully remove the wrapped LED Head (13) and
small box (14). Remove the wrapping from the LED Head, and remove the Cleaning Pad from the
small box.
7. Loosen the screw (15) on the LED Head Unit, and install the Cleaning Pad (16) with this screw.
15
12
9
13
16
2-16
11
10
14
16