KIP 9000 Service Manual page 436

2) Remove each Image Corona (2), Drum Assembly (3), Toner Hopper (4) and Developer Unit (5)
from the Process Unit making reference to [5.1.2 Removing Image Corona, Drum Assembly,
Toner Hopper & Developer Unit] on the page 5-6.
NOTE
If you take checking or adjustment of gap without removing the Developer Unit, you may
damage the surface of Development Roller with the tip of Pin of the Drum Gauge
3) Open the Rear Upper Cover (6).
3 2
4 5
5-224
6
K115sm5eG.doc