Image Placement For Roll 4 (No.30 To 3B) - KIP 9000 Service Manual

(5) Image placement for Roll 4 (No.30 to 3b)

It is possible to adjust the vertical placement of print image on the media. These settings are
applied when printed with Roll 4. The setting unit is 0.1mm, and the setting range is from 0 to
200 (0mm to 20.0mm). Increment of the value moves the whole image toward the trailing edge
side (that is, the leading margin gets wider).
Value is decreased.
Each Item No. has its own target media type and media size.
Please adjust the proper item.
Item No. Media type
30 Plain paper
31 Plain paper
32 Plain paper
33 Plain paper
34 Tracing paper
35 Tracing paper
NOTE
(1) Media sizes "large", "medium", "small" and "smallest" stand for as follows.
Metric (Width)
Large A0 and B1
Medium A1 and B2
Small A2 and B3
Smallest A3
(2) Items from No.30 to 3b are "dual value items" that are available to set both "Standard
Setting Value" and "Special Setting Value".
Refer to [(10) Standard / Special Setting Value Changing Modes (Items No.09, 0A & 0b)]
on and after the page 8-51 for the detail.
Media size Item No.
Large 36
Medium 37
Small 38
Smallest 39
Large 3A
Medium 3b
Inch (Width)
36", 34" and 30"
24" and 22"
18" and 17"
12" and 11"
8-100
Value is increased.
Media type Media size
Tracing paper Small
Tracing paper Smallest
Film Large
Film Medium
Film Small
Film Smallest
K115sm8e3.doc