KIP 9000 Service Manual page 666

(11) Toner Supplying Mode (Item No.9)
Toner Supplying Mode is a kind of setup mode used during machine installation or developer
maintenance. When it is executed, necessary amount of toner can be supplied from Hopper to
Developer automatically.
1. Indicate the Item Number "09" on the 2nd digit. After confirming that "- -" on 5th and 6th digits is
lighting, press the [ ENTER ] Key to start supplying the toner. The 5th and 6th digits indicate
"8 8" in flashing during toner supply.
NOTE
It is unable to start supplying the toner even if the [ ENTER ] Key is pressed if "- -" is flashing
on the 5th and 6th digits.
2. When the printer detects "toner full", it stops toner supplying automatically. "- -" lights on 5th
and 6th digits again.
MENU ENTER ONLINE
MENU ENTER ONLINE
"8 8" flashes during toner supply.
MENU ENTER ONLINE
MENU ENTER ONLINE
8-141 K115sm8e4.doc