KIP 9000 Service Manual page 584

(15) Pre-Transfer LED / Separation Corona OFF timing (PPC) (No.15)
The OFF timing of Separation Corona and Pre-Transfer LED can be decided. This setting is
applied when printed with a plain paper. There are 2 selectable settings.
Setting value Description
0 Both Separation Corona and Pre-Transfer LED turn OFF normally.
1 When plain paper is used, both Separation Corona and Pre-Transfer LED
turn OFF 0.12 seconds earlier than the normal timing.
(For tracing paper and film, they turn OFF normally.)
NOTE
Transfer defect may occur on the trailing edge of print if the used plain paper is very special,
but such problem might be fixed if No.C8 is set to "1". (Transfer defect means the toner
remains on the Drum without being transferred onto the print media.)
Pre-Transfer LED
8-59
Separation Corona
K115sm8e2.doc