Sub Separation Blower On / Off (No. Bf To C1) - KIP 9000 Service Manual

(34) Sub Separation Blower ON / OFF (No. BF to C1)

Whether or not the Sub Separation Blower operates can be decided.
Setting value Description
0 Sub Separation Blower does not operate during the print cycle.
1 Sub Separation Blower operates during the print cycle.
Each Item No. has its own target media type.
Please adjust the proper item.
Item No. Target media
bF Plain paper
C0 Tracing paper
C1 Film
NOTE
If the media is not separated well from the Drum and the Separation Area Jam (J-12) occurs
often, the air blow from the Sub Separation Blowers might solve the problem. Try to set this
mode to "1" in such case.
On the other hand, the machine inside may become dirty in this case as the toner is blown by
the air. Occasional cleaning will be required.
Sub Separation Blowers
(BL12, BL13, BL14, BL15 & BL16)
8-73 K115sm8e2.doc