KIP 9000 Service Manual page 654

8. 1.10 Special Operation Mode (Sub Mode 9)
8. 1.10. 1 Function
Special Operation Mode offers the following items;
Refer to [8.1.10.3 Operation/description of each item] on and after the page 8-131.
Item Setting item
No.
00 Image Corona Wire Cleaning Mode
01 Cutter Cleaning Mode
02 LED Head Cleaning Mode
03 Image Corona Adjustment Mode
04 Pre-Transfer LED Adjustment Mode
05 Transfer Corona Adjustment Mode
06 Separation Corona Adjustment Mode
07 Positive Developer Bias Adjustment Mode
(Toner Collection Process)
08 Negative Developer Bias Adjustment Mode
(Print Process)
09 Toner Supplying Mode
0A Surface Potential Control Mode : Manual execution of
control
0b Density Lock Mode : Setting of Target Density
0C Density Control Mode : Manual execution of control
NOTE
Adjustment modes (Item No. from 03 to 08) are for manufacturer's use to make a final
machine inspection right before shipment. It is not recommended for the service side to make
operation in these modes.
Permission for
the operation
Do not operate
Do not operate
Do not operate
Do not operate
Do not operate
Do not operate
8-129
Refer to
page ;
8-132
8-133
8-134
8-135
8-136
8-137
8-138
8-139
8-140
8-141
8-142
8-143
8-144
K115sm8e4.doc