KIP 9000 Service Manual page 400

5.13.5 Replacing Cutter Motor (M3),
Cutter Home Position Sensor (PH22) &
Internal Transportation Unit Set Sensor (PH24)
1) Remove 4 pieces of tooth washer screw (1) to remove the Side Cover L (2).
1
1
2) Disconnect the connector (3), and then remove 2 pieces of tooth washer screw (4) to remove the
Cooling Fan 4 (5) with its bracket.
2
5-188
3
4
K115sm5eE.doc
5
5