KIP 9000 Service Manual page 281

15) Remove the Fuser Roller
Remove both the Collar E
Fuser Roller.
Replace both the Fuser Roller (36) and the Collar E (37) with the new ones.
33
NOTE
(1) You do not have to be care about the direction (left or right) of the Fuser Roller when you
install the new one.
However, please install the side having Collar E and Collar 4 to the driving side of
machine.
(2) Collar E (37) is not a Periodical Replacement Part, so basically you do not have to replace
if it is not broken.
But the Collar E will be strongly fixed to the Fuser Roller after a long term of usage, so it
will be broken in many cases if you try to remove from the Fuser Roller.
Please replace with the new one if it is broken.
(36) pulling out to your side.
(37) and Collar 4 (38) from one side (driving side of machine) of the
5-69 K115sm5e5.doc