9) Remove the tooth washer screw (23) to remove the Mount (24).
23
10) Disconnect the connector (25), and then remove 2 pieces of bind head screw (26) to remove the
Cutter Home Position Sensor
Replace the Cutter Home Position Sensor (27) with the new one.
24
11) Loosen 2 pieces of Set Screw (27) to remove the Joint B (28).
NOTE
Lock the Set Screws (27) with the locking paint when you reassemble.
(27).
25
27
5-193
24
26
28
K115sm5eE.doc