KIP 9000 Service Manual page 724

8. 2.13 User Mode D
(Auto SP Control ON/OFF :
Temporary clearance of E-26 error)
[Function]
Auto SP Control can be set to ON or OFF. When it is set to OFF, service call errors E-26 might be
temporarily cleared for avoiding the breakdown of KIP9000.
Reference
The image quality varies according to the variation of temperature of surrounding environment.
To achieve a constant image quality in any environment, KIP9000 flexibly adjusts the
Developer Bias to the most appropriate level monitoring the variation of actual density with the
Density Sensor. And accompanying to the variation of Developer Bias, the surface potential of
Drum is also adjusted flexibly to have a proper voltage gap against Developer Bias. This
control for the surface potential is called Auto SP Control. If the Auto SP Control can not work
correctly for some reason, a service call error E-26 is indicated and no more print becomes
available.
As the user can not clear this error, KIP9000 will continue to be in breakdown until the error is
cleared by the service personnel. But if the error can be temporarily cleared in the User Mode
E by easing the error check level, KIP9000 will be relieved from breakdown and you will be
able to continue printing.
When you will clear the error by the User Mode E, note that;
•
Image quality may not be satisfactory as the real time adjustment does not work.
•
There may be some case that the error can not be cleared even if you ease the error
check level.
•
The User Mode E does not remove the real cause of error. Therefore the service
personnel need to go customer site immediately for removing the real cause of error.
1. Press the [ MENU ] Key 13 times to select the User Mode D. [ MENU ] Key lights green and
the Status Display indicates "Ud.".
MENU ENTER ONLINE
Press [ MENU ] 13 times.
MENU ENTER ONLINE
8-199 K115sm8e6.doc