KIP 9000 Service Manual page 241

8) Remove the C Ring (20), 56T Gear (21), Parallel Pin (22) and
Replace the Counter Roller
20
NOTE
When reassemble, install Counter Roller in proper direction. The face with 6 bosses should be
installed inside of Developer Unit.
9) Remove the Stud (24), M4x10 screw (25), M4x12 screw (26) to remove the Guide Bracket (27).
26
(23) with the new one.
Bosses
24
25
5-29
Counter Roller (23).
27
23
22
21
Bosses
K115sm5e3.doc