Checking & Adjustment Of Hvp5 (Cleaning Roller) - KIP 9000 Service Manual

4. 3. 5 Checking & Adjustment of HVP5
(Cleaning Roller)
The standard value of positive/negative Cleaning Roller Bias outputted from the HVP5 are as
follows.
Positive Cleaning Roller Bias
Negative Cleaning Roller Bias
Check and adjust the HVP5 in the following way.
1. Connect "+" of the multi-meter to "OUTPUT" pin on the HVP5 and "-" to the ground.
Select the DC volt range on the multi-meter.
+800V +/-3V
-500V +/-3V
GND
Multi-meter
(DC volt range)
4-76 K115sm4ea.doc