Function Checking Mode (Sub Mode 3); Function; Indication On The Operation Panel - KIP 9000 Service Manual

High volume network printer
Table of Contents

Advertisement

8. 1. 4

Function Checking Mode (Sub Mode 3)

8. 1. 4. 1

Function

An individual electric component can be operated singularly to check its operation in the Function
Checking Mode.
Refer to [8.1.2.4 Signal code list] on and after the page 8-12 for the Signal Code and its
target component.
NOTES
(1) Only 1 component is available to operate at one time except for the Image Corona.
When [Image Corona Control Signal (Signal Code : A0)] is operated, [Grid Bias Control
Signal (A6)] is automatically operated same time.
(Even if [Grid Bias Control Signal] is operated, [Image Corona Control Signal] is not
operated same time.)
(2) Do not keep on operating the following Coronas so long time!
The Drum does not rotate while the Corona is discharging. If the following Corona Units
keep on discharging long time, it will lead to the damage of Drum as one point of Drum
surface is strongly charged.
Image Corona Control Signal (Signal Code : A0)
Grid Bias Control Signal (A6)
Transfer Corona Control Signal (A2)
Separation Corona Control Signal (A1)
(3) Do not operate the following lamps so long!
Cooling fans do not operate while the lamp is lighting. It will result in the breakage of lamp
as it will be heated up so much.
Eraser Lamp Control Signal (Signal Code : 78)
Separation Lamp Control Signal (7b)
Pre-Transfer LED Control Signal (A3)
(4) Do not operate the Fuser Lamps so long!
Fuser Roller and surrounding parts will be heated up so much and will be broken.
Fuser Lamp 1 Control Signal (Signal Code : BE)
Fuser Lamp 2 Control Signal (Signal Code : BF)
8. 1. 4. 2

Indication on the Operation panel

The 1st digit from the left indicates "3" which is the Sub Mode number of "Function Checking
Mode".
The 2nd and 3rd digits from the left indicate the Signal Code presently selected.
The 5th and 6th digits indicate the status of the selected component.
Sub Mode Number of Function Checking Mode
Signal Code
Status of the selected component
MENU
8-32
ENTER ONLINE
K115sm8e1.doc

Advertisement

Table of Contents
loading

Table of Contents