Download Print this page

Specifications For Originals; Original Standards; Special Documents - KIP 700 C Series User Manual

Advertisement

1. 7

Specifications for Originals

A scan original must satisfy the following specifications.
Thickness
Width
Length
NOTE :
1. Image quality for an original with 0.25mm or thicker is guaranteed only in a standard size even the scanner physically accepts it.
2. Image quality for an original over 6,000mm in length is not guaranteed.
1. 7. 1

Original Standards

(1) The width of original must range from 8.5" to 36" (210mm to 914.4mm).
(2) The length of original must range 8.5" (210mm) to 6,000mm
(3) The thickness of original must range from 0.05mm to 0.25mm.
(4) The shape of original must be square, and it must be standard sized.
(5) The type of original must belong to any of the followings.
Plain paper
Coated paper (High or middle class plain paper is coated with the paint.)
Tracing paper
Pansy Trace Paper (Both sides of the film is sandwiched between Tracing paper.)
Film
Newspaper
Cardboard paper
1. 7. 2

Special Documents

The following kinds of originals are "special". It is possible to scan them,
and feed reliability are not
(1) The type of original is acceptable, but the thickness and type may not be:
Booklets
Original with a Hanger
Cut and Pasted originals
(2) These original may not damage the scanner, but these types are NOT recommended:
following ones.
Cloth
Aluminium Kent Paper
0.05mm to 1.60mm
210mm to 914.4mm
210mm to 6,000mm
guaranteed.
1-15
but the image quality
Chapter 1 Before Use

Advertisement

loading