KIP 9000 Service Manual page 375

8) Swing the "Drum Gauge for Transfer Corona" forward and backward to check whether or not its
pins touch the Mylar (14) on the Corona Housing 5.
One of 2 pins marked with 0.4mm (15) should not touch the Mylar (14).
Another pin marked with 1.0mm (16) should touch the Mylar (14) slightly.
If the above conditions are satisfied, the gap is between 0.4mm and 1.0mm.
16
15
14
0.4mm pin
1.0mm pin 0.4mm pin
1.0mm pin
Diameter of Drum Diameter of Drum
Mylar Mylar
1.0mm pin should touch the Mylar slightly. 0.4mm pin should not touch the Mylar.
NOTE
Please check not at one point but entirely along the Drum Shaft.
5-163 K115sm5eB.doc