Sleep Mode - KIP C7800 User Manual

2. 8

Sleep Mode

The KIP C7800 has two Sleep Modes to reduce the power consumption.
The KIP C7800 will enter Sleep Mode after a certain period of inactivity.
In the default setting;
•
Warm Sleep Mode will start after a 15 minute of inactivity in order to reduce the power
supply for Fuser Unit.
•
Cold Sleep Mode will start after a 60 minute of inactivity to stop the power supply for Fuser
Unit and some other components.
You can set the period to 240 minutes for example. See further information on Touchscreen
Configuration.
Sleep Mode is canceled and the machine gets ready when;
•
the machine receives a print job through the network.
•
you tap on the UI screen.
NOTE
(1) It may take time for the machine to get ready.
(2) Recommended Default Delay Times for Cold Sleep: 60min
(3) Cold Sleep Mode meets the Printer Sleep Mode statement of ENERGY STAR® Office
Equipment Program.
2-26 Chapter 2 Basic Operations