Esr; Idn; Opc - Agilent Technologies 4288A Programming Manual

*ESR?

Syntax *ESR?
Description
Reads out the value of the Standard Event Status Register. Executing this command clears
the register value. (Query only)
Query response {numeric}<newline><^END>
Equivalent key No equivalent key is available on the front panel.
sequence

*IDN?

Syntax
*IDN?
Description Reads out the product information (manufacturer, model number, serial number, and
firmware version number) of the 4288A. (Query only)
Query response
{string 1},{string 2},{string 3},{string 4}<newline><^END>
Readout data is as follows:
{string 1}
{string 2}
{string 3}
{string 4}
Equivalent key
[Config]
sequence

*OPC

Syntax *OPC
Description Sets the OPC bit (bit 0) of the Standard Event Status Register at the completion of all
pending operations. (No query)
Equivalent key
No equivalent key is available on the front panel.
sequence
*OPC?
Syntax *OPC?
Description
1 is read out at the completion of all pending operations. (Query only)
Query response
{1}<newline><^END>
Equivalent key No equivalent key is available on the front panel.
sequence
Chapter 10
Manufacturer. Agilent Technologies is always read out.
Model number. 4288A is always read out.
10-digit serial number (example: JP1KH00101).
Firmware version number (example: 01.00).
( [Blue] - [-] )- Rev
Command Reference
*ESR?
125