Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
14.4 Virtual LAN Routing Commands
This section describes the commands you use to view and configure VLAN routing and to
view VLAN routing status information.
14.4.1 vlan routing
This command creates routing on a VLAN. The
4094.
Format
Mode
14.4.1.1 no vlan routing
This command deletes routing on a VLAN. The
4094.
Format
Mode
14.4.2 show ip vlan
This command displays the VLAN routing information for all VLANs with routing
enabled.
Format
Modes
MAC Address
used by Routing
VLANs
VLAN ID
Logical Interface
IP Address
Subnet Mask
14-24
<vlanid>
vlan routing <vlanid>
VLAN Config
<vlanid>
no vlan routing <vlanid>
VLAN Config
show ip vlan
Privileged EXEC
User EXEC
Is the MAC Address associated with the internalbridge-router
interface (IBRI). The same MAC Address is used by all
VLAN routing interfaces. It will be displayed above the per-
VLAN information.
Is the identifier of the VLAN.
Shows the logical unit/slot/port associated with the VLAN
routing interface.
Displays the IP Address associated with this VLAN.
Indicates the subnet mask that is associated with this VLAN.
v1.0, March 2006
value has a range from 1 to
value has a range from 1 to
Routing Commands