Virtual Lan Routing Commands; Vlan Routing; Show Ip Vlan - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

Term Definition
Preference The preference of the address as a default router address, relative to other router
addresses on the same subnet.

Virtual LAN Routing Commands

This section describes the commands you use to view and configure VLAN routing and to view
VLAN routing status information.

vlan routing

This command creates routing on a VLAN. The <vlanid> value has a range from 1 to 4093.
Format
vlan routing <vlanid>
Mode VLAN Config
no vlan routing
This command deletes routing on a VLAN. The <vlanid> value has a range from 1 to 4093.
Format
no vlan routing <vlanid>
Mode VLAN Config

show ip vlan

This command displays the VLAN routing information for all VLANs with routing enabled.
Format
show ip vlan
Modes • Privileged EXEC
• User EXEC
Term Definition
MAC Address The MAC Address associated with the internal bridge-router interface (IBRI). The same
used by Routing
MAC Address is used by all VLAN routing interfaces. It will be displayed above the per-
VLANs
VLAN information.
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-24