Show Storm-Control; Virtual Lan (Vlan) Commands; Vlan; No Vlan - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Group ID
Protocol(s)

VLAN

Interface(s)

show storm-control

This command displays switch configuration information.
Format
Mode
Broadcast Storm Recovery Mode
802.3x Flow Control Mode

Virtual LAN (VLAN) Commands

vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification
number (ID 1 is reserved for the default VLAN). VLAN range is 2-4094.
Format
Mode

no vlan

This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is
reserved for the default VLAN). VLAN range is 2-4094.
Format
Mode
Switching Commands
This field displays the group identifier of the protocol group.
This field indicates the type of protocol(s) for this group.
This field indicates the VLAN associated with this Protocol Group.
This field lists the slot/port interface(s) that are associated with this Protocol
Group.
show storm-control
Privileged EXEC
May be enabled or disabled. The factory default is dis-
abled.
May be enabled or disabled. The factory default is disabled.
vlan <2-4094>
VLAN database
no vlan <2-4094>
VLAN database
202-10102-01, May 2005
8-49