To Use The Built-In Commands - Agilent Technologies E5900B User Manual

To use the built-in commands

Here are a few commonly used built-in commands:
Overview of Useful built-in commands
b Break—go into the background monitor state
cf Configuration—read or write configuration options
help Help—display online help for built-in commands
init Initialize—init -c re-initializes everything in the emulation
probe except for the LAN software
lan configure LAN address
m Memory—read or write memory
reg Register—read or write a register
mtest Memory test—test target memory system
r Run—start running user code
rep Repeat—repeat a command or group of commands
rst Reset—reset the target processor
s Step—do a low-level single step
ver Version—display the product number and firmware version of the
emulation probe
Use help
c o m m a n d _ n a m e
syntax. For example, enter help m or ? m to get help on the memory
command.
Emulation for the Motorola M•CORE
Troubleshooting the Emulation Probe
Using the Emulation Probe Command Line Interface
or ?
c o m m a n d _ n a m e
to see the command
133