Calibration Procedures; Equipment Required - Agilent Technologies 53147A Assembly Level Service Manual

Table 2-1. Recommended Test Equipment and Accessories
Instrument Type
Digital Multimeter
Power Meter
Power Meter
Frequency Counter
Thermistor Mount
Power Sensor
Power Sensor Cable
Range Calibrator
Serial Cable
Precision DC Power Supply + 50 V / – 50 V
Cable
Adapter
* Equivalent equipment can be substituted for all instruments and accessories.
** OV = Operational Verification P = Performance Tests C = Calibration T = Troubleshooting
† One supplied with Agilent 53147A/48A/49A
Chapter 2 Service

Calibration Procedures

Calibration Procedures
There are four calibration procedures that can be performed outside of an
Agilent authorized service facility. The following procedures describe how
to calibrate the frequency of the instrument's timebase, the frequency and
output level of the power reference oscillator, and the DVM.

Equipment Required

Table 2-1 lists the test equipment and accessories needed to perform the
calibration procedures in this chapter.
Required Characteristics
6½ digit AC/DC
Range 1 mW
100 kHz to 110 GHz, –70 dBm to +44 dBm
10 Hz to 125 MHz
SWR 1.05 at 50 MHz
Accuracy ±0.5% at 50 MHz
10 MHz to 18 GHz, -30 dBm to +20 dBm
5 ft.
3, 10, 30, 100, and 300 µW
1, 3, 10, 30, and 100 mW
RS-232, DB-25 to RJ-45
BNC (m) to BNC (m)
Type N (m) to BNC (f)
2-6
Model
Recommended *
Agilent 34401A
Agilent 432A
Agilent E4418B
Agilent 53150A/51A/52A
Agilent 478A-H75 or
478A-H76
Agilent 8481A
Agilent 11730A
Agilent 11683A
Agilent 53150-60215
Agilent 6613C or 6614C
Agilent 10503 series
Agilent E9635A
Assembly Level Service Guide
Quantity
Required
1
1
1
1
1
1
†
1
1
1
1
1
1