General information | Basic operation
3.8.1
User interface after switch-on
Factory default user interface
The figure shows the user interface in the product's factory default setting.
This user interface will also be displayed after the product has been reset to its
factory default setting.
Figure 2: The user interface in the product's factory default setting
User interface after start-up
If automatic user login is activated, and the last user who logged in was of the
Operator type, then the product displays the Manual operation menu after starting
up.
Further information: "Manual operation menu", Page 30
If automatic user login is not activated, then the product opens the User login menu.
Further information: "User login menu", Page 37
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
I
27