III
Transverse roughing
274
2.
1.
Insert the roughing tool into the tool holder
Tap Tools on the status bar
The Tools dialog box appears
Tap Roughing tool
Tap Confirm
The associated tool parameters are applied by the product
automatically
The Tools dialog box is closed
Set a spindle speed of 1500 rpm
Position the tool:
X: Ø 14.0 mm
Z: 0.2 mm
Position the tool:
X: Ø -0.4 mm (1.)
Move the tool to a safe position (2.)
Information for the Operator user | Application example
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022