Machining Threads; Figure 60: Example Workpiece - Machining The Thread - HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual

III
5.9

Machining threads

The thread is machined in MDI mode. You can find the input parameters for the
thread in a book of metal tables, for example.
Requirements:
X axis as NC axis
Z axis as NC axis
Rotational axis as NC axis or spindle with orientation
2.
Figure 60: Example workpiece – machining the thread
Calling up
280
If your lathe does not meet the requirements, you can machine the thread
with a threading die, for example. Alternatively, you can use the wheels
for the 1.5 mm pitch and turn the thread using the clasp nut.
1.
3.
Tap MDI in the main menu
The user interface for MDI mode is displayed
Information for the Operator user | Application example
4...n
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022