Moving With Jog Increment - HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual

Information for the Operator user | Manual operation
1.8

Moving with jog increment

In Manual mode you can traverse incrementally with the Jog increment function.
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Tap Feed rate/Jog increment on the status bar
The Feed rate/Jog increment dialog box is opened
Activate the jog increment with the ON/OFF slide switch
Enter the jog increment in the corresponding input field
For linear axes, use the input fields for mm/rev and mm/
min
For rotational axes, use the jog increment ° input field
Tap Close to close the dialog
The axes can be moved at the entered jog-increment value
If jog increment is activated, this is shown by an icon
III
231