HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 140

II
4.7.1 Standard M functions
The product supports the following standard M functions (oriented to DIN 66025/
ISO 6983):
Code
M2
M3
M4
M5
M8
M9
M30
These M functions are independent of the machine; some M functions however
depend on the machine tool configuration (e.g. spindle functions).
4.7.2 Manufacturer-specific M functions
The product also supports manufacturer-specific M functions with the following
characteristics:
Number range definable from M100 to M120
Function depends on the machine manufacturer
Use in the button of the OEM bar
Further information: "Configuring the OEM bar", Page 142
4.8
OEM area
In the OEM area, commissioning engineers can customize the product in various
ways:
Documentation: Adding the OEM documentation, e.g. service information
Startup screen: Defining a startup screen with the OEM's company logo
OEM bar: Configuring an OEM bar with specific functions
Settings: Selecting the application, customizing the display elements and
messages
Screenshots: Configuring the unit for screenshots with the program Screen-
shotClient
140
Description
Program STOP, spindle STOP, coolant OFF
Spindle rotation in clockwise direction
Spindle rotation in counterclockwise direction
Spindle STOP
Coolant ON
Coolant OFF
Program STOP, spindle STOP, coolant OFF
The manufacturer-specific M functions M100 to M120 are only available
if the connected output has been previously configured.
Information for OEM and Setup users | Commissioning
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022