HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 84

II
Configuring the axes
For EnDat interfaces:
Configuring axes for
encoders with EnDat interface
Performing error
compensation
Ascertaining the line count
per revolution
Configuring the central drive
Configuring specific settings for Axis + NC
Configuring the spindle axis
Configuring an Electronic handwheel
Coupling axes
Diameter axis
Configuring thread cutting
Configuring thread cutting (NC software option)
Configuring M functions
Standard M functions
Manufacturer-specific M functions
OEM area
Adding documentation
Adding a startup screen
Configuring the OEM bar
Adjusting the display
Defining error messages
Backing up and restoring OEM settings
Configuring the unit for screenshots
Backing up data
Back up settings
Back up user files
Loss of or damage to configuration data!
If the product is disconnected from the power source while it is on, the
configuration data can be lost or corrupted.
Back up the configuration data and keep the backup for recovery purposes
84
Information for OEM and Setup users | Commissioning
For 1 V or 11 μA inter-
PP PP
faces:
Activating the reference
mark search
Configuring the axes for
encoders with a 1 V or 11
PP
µA interface
PP
Performing error
compensation
Ascertaining the line count
per revolution
NOTICE
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022