HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 142

II
4.8.3 Configuring the OEM bar
You can configure the appearance and the menu items of the OEM bar.
Settings ► Service ► OEM area ► OEM bar
Parameter
Show bar
Bar items
Adding bar items
Settings ► Service ► OEM area ► OEM bar ► Bar items ► +
Parameter
Description
Type
Parameter
Remove bar entry
142
If you configure more menu entries than can be shown in the OEM bar,
then you can scroll the OEM bar vertically.
Information for OEM and Setup users | Commissioning
Explanation
Display of the OEM bar
Settings:
ON: OEM bar is displayed on the user interface of the
respective operating modes
OFF: OEM bar is not displayed
Default value: OFF
Configuration of the Bar items in the OEM bar
Explanation
Description of the bar item on the OEM bar
Selecting the new bar item on the OEM bar
Settings:
Empty
Logo
Spindle speed
M function
Special functions
Document
Default value: Empty
The available parameters depend on the type of bar item selected:
Logo
Spindle speed
M functions
Special functions
Document
Removing the bar item from the OEM bar
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022