HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 143

Information for OEM and Setup users | Commissioning
Configuring the OEM logo
You can display an OEM-specific company logo on the OEM bar. By tapping the OEM
logo, you can optionally open a PDF file of the OEM documentation.
Settings ► Service ► OEM area ► OEM bar ► Bar items ► Logo
Parameter
Description
Type
Select logo
Link to documentation
Upload image file
Remove bar entry
Configuring nominal values for the spindle speed
On the OEM bar, you can define menu items that control the spindle speeds
depending on the configuration of the machine tool.
You can overwrite configured spindle speeds with the value of the
currently set speed of the spindle axis by pressing and holding the
desired Spindle speed field.
Further information: "Calling functions of the OEM bar", Page 49
Settings ► Service ► OEM area ► OEM bar ► Bar items ► Spindle speed
Parameter
Description
Type
Spindle
Spindle speed
Remove bar entry
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Explanation
Description of the bar item on the OEM bar
Logo
Selecting the desired image for the depiction
Using a logo for calling linked documentation
Settings:
None
Operating Instructions
OEM service info
Default value: None
Copies a selected image file to the storage location /Oem/Images
File format: PNG, JPG, PPM, BMP, or SVG
Image size: max. 140 x 70 px
Removing the bar item from the OEM bar
Explanation
Description of the bar item on the OEM bar
Spindle speed
S
Setting the spindle speed
Setting range: depends on the configuration of the spindle axis
S
Default value: 0
Removing the bar item from the OEM bar
II
143