6
6.8.1
User interface after switch-on
Factory default user interface
The illustration shows the user interface the way it looks when you switch on the
product for the first time.
This user interface will also be displayed after the product has been reset to its
factory default settings.
Figure 13: The user interface in the product's factory default setting
User interface after startup
If automatic user login is activated, and the last user who logged in was of the
Operator type, then the product displays the Manual operation menu after
starting up.
Further information:
If automatic user login is not activated, then the product opens the User login
menu.
Further information:
68
"Manual operation menu", Page 71
"User login menu", Page 78
Basic operation | User interface
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020