HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 41

General information | Basic operation
Coupling axes
Z
+Z
Decoupling axes
Z
Setting the spindle speed
You can control the spindle speed depending on the configuration of the connected
machine tool.
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
In the working space, drag the Z axis key to the right
Tap Couple
The Zo axis is now coupled with the Z axis
The icon for the coupled axes is shown next to the Z axis key
The position value for the coupled axes is shown as a sum
In the working space, drag the Z axis key to the right
Tap Decouple
The position value of both axes are shown independently of
each other
To switch from the display of the spindle speed to the input
field (if required), drag the display to the right.
The Spindle speed input field is displayed
Tap or long-press + or – to set the spindle speed to the desired
value
or
Tap the Spindle speed input field
Enter the desired value
Confirm entry with RET
The product applies the entered spindle speed as the nominal
value and controls the spindle of the machine tool accordingly
To return to the display of the actual spindle speed, drag the
input field to the left
I
41