III
3.3
Managing programs
To run a program, open the program file, which must be of the *.i type.
3.3.1
Opening a program
3.3.2
Closing a program
252
The default storage location for programs is Internal/Programs.
Tap Open program in the program management
Select the storage location in the dialog, e. g.
Internal/Programs or USB mass storage device
Tap the folder containing the file
Tap the file
Tap Open
The selected program is loaded
Tap Close program in the program management
The opened program is closed
Information for the Operator user | Program run
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022