HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 16

I
Operator
The operator uses and operates the product within the framework specified for the
intended use. He is informed by the operating company about the special tasks and
the potential hazards resulting from incorrect behavior.
Qualified personnel
The qualified personnel are trained by the operating company to perform advanced
operation and parameterization. The qualified personnel have the required technical
training, knowledge and experience and know the applicable regulations, and are
thus capable of performing the assigned work regarding the application concerned
and of proactively identifying and avoiding potential risks.
Electrical specialist
The electrical specialist has the required technical training, knowledge and
experience and knows the applicable standards and regulations, and is thus capable
of performing work on electrical systems and of proactively identifying and avoiding
potential risks. Electrical specialists have been specially trained for the environment
they work in.
Electrical specialists must comply with the provisions of the applicable legal
regulations on accident prevention.
2.6 Obligations of the operating company
The operating company owns or leases the device and the peripherals. At all times,
the operating company is responsible for ensuring that the intended use is complied
with.
The operating company must:
Assign the different tasks to be performed on the device to suitable, qualified and
authorized personnel
Verifiably train the personnel in the authorizations and tasks
Provide all materials and means necessary in order for the personnel to complete
the assigned tasks
Ensure that the device is operated only when in perfect technical condition
Ensure that the device is protected from unauthorized use
2.7 General safety precautions
The specific safety precautions required for the individual activities to be performed
on the product are indicated in the respective sections of these instructions.
16
The safety of any system incorporating the use of this product is the
responsibility of the assembler or installer of the system.
The product supports the use of a wide variety of peripheral devices from
different manufacturers. HEIDENHAIN cannot make any statements
on the specific safety precautions to be taken for these devices. The
safety precautions provided in the respective documentation must be
observed. If there is no documentation at hand, it must be obtained from
the manufacturers concerned.
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
General information | Safety